top of page

Circular Embroidery Attachment #83

Happy all around

For decorative circles and semicircles

Can be used for different diameters

Use with utility, decorative stitches or alphabets

Also suitable for appliquéing ribbons

For 5.5 mm and 9 mm machines

 

The attachment is screwed to the freearm. The center of rotation can be either to the right or left of the needle, with the attaching screw lying flat enough to allow the fabric to feed smoothly over it. A diameter of between 1 inch and 5-5/16 inches (2.5 cm and 13.5 cm) can be set on the slide.

The fabric must be properly reinforced for circular embroidery, so 2-3 layers of stabilizer should be placed under your project. The fabric is put onto the pin at the center of the desired circle and held in place with a rubber cap to prevent shifting during sewing. The Circular Embroidery Attachment #83 can be used in conjunction with various presser feet, and will enable you to sew circles with any decorative stitches you wish, and even arrange lettering in a circle.

 

The foot is NOT included in this purchase.

 

Part #0083737300

Bernina Circular Embroidery Attachment #83

$74.00Price
    both the metre and partial metre fields
    For fabric this field may say contact the
    shop until you enter data into
    bottom of page